Alke
Electric Vehicles Alke'
Which batteries are used for traction? |
Alkè electric vehicles use traction lead acid batteries and the autonomy is about 70-90 Km, which corresponds to an entire working day even when many stops are required.![]() The re-charge of drive batteries, normally carried out during the downtime, takes place using the high frequency battery-charger present on the machine, this means it can be connected anywhere there is a common main socket without being restrained to fixed bases. The special battery chargers used by the ATX E guarantee a greater number of charges with respect to the technologies commonly used (greater number of charges = longer life of the battery set = saving of management costs). It is not necessary to wait for the battery to be totally flat before re-charging it, the so-called “memory effect” present in other lower sectors is not found here. The drive batteries must be re-charged (if the vehicle is not used) at least once a month. |

- up to 3.000kg towing capacity
- no noise and pollution
- up to 1.000kg loading capacity
- up to 40% slopes
- off-road capabilities
- all about electric UTV

- load volume 2000 Lt.
- no noise and pollution
- up to 30% slopes
- tipping angle of 90°
- all about waste vehicles

- 4-wheel drive 4x4
- reduced speed
- up to 600Kg loading capacity
- up to 100% slopes
- perfect for off-road
- all about 4x4 utility vehicles